Dell 780 USFF PC – Calibrating a Gen Touch Screen (Storm HD Cab)

Before attempting, please ensure that you have a USB Keyboard present.

  • Open the door where the PC is seated and insert the USB Keyboard into one of the available USB slots - located on the Dell 780 PC 
  • Close the door so it is resting against the machine
  • Power on the machine
  • Allow the machine to boot up fully into game with all doors shut
  • Press Ctrl, Alt and Delete on your USB Keyboard
  • The following list will now appear on your screen
    1. Lock this Computer
    2. Switch User
    3. Log Off
    4. Change Password
    5. Start Task Manager
  • Press Alt and T on your keyboard
  • Task Manager will now open and from the list on the Processes page, using the arrow keys to scroll up and down the list, hi light Typhoon.exe then press End Process (Alt and E on the keyboard)
  • A page will not appear asking if you want end Typhoon.exe*32 press End Process to confirm (Enter on the keyboard)
  • Next you will need to close the Task Manager page, this is done press pressing the Alt and F4  keys on your keyboard
  • This will now leave the Storm splash screens on both top and bottom monitors
  • Press Ctrl and Esc on your keyboard the following should appear on your screen
    1. All Programs
    2. Control Panel
    3. Log Off
    4. Restart
  • You need to select Control Panel, this is done by pressing the Tab key on your keyboard until you get to Computer and then using your arrow keys to go down to Control Panel
  • Once Control Panel is hi lighted press Enter on your keyboard to confirm
  • The Control Panel page will now appear on your bottom monitor
  • Using your arrow keys on your keyboard navigate to the Generaltouch Touch Screen tile 
  • Once the Generaltouch Touch Screen tile has a black dotted line around it press Enter on the keyboard
  • This will now take you into the Generaltouch Touch Screen Properties page
  • Once on this page, you will see that you will be on the Calibration tab and lower down on this page will be a tile with a blue monitor and a pointer on, this will already be hi lighted a pale blue colour
  • Now press the Enter key on your keyboard, this will bring up the grey screen with the touch targets on the bottom monitor
  • Press the targets on the bottom monitor and once completed a box will now pop up called Checking Calibration Results
  • The box will say “Try moving on the screen, Does the cursor jump to your fingertip” . Press Yes
  • The target screen will now disappear leaving you back in the Generaltouch Touch Screen Properties page
  • Press the OK Button located at the bottom of the Generaltouch Touch Screen Properties page
  • This will close the Properties page
  • Now press the Red X in the top right-hand corner of the Control Panel page, this will now also close
  • This will now leave the Storm splash screens on both top and bottom monitors
  • Press Ctrl and Esc on your keyboard the following should appear on your screen
    1. All Programs
    2. Control Panel
    3. Log Off
    4. Restart
  • You need to select Restart, this is done by pressing the Tab key on your keyboard until you get to Restart, press Enter on your keyboard to confirm
  • The PC will now start to shut down and restart
  • Now remove the USB Keyboard