HOW TO INSTALL THE ZYTRONIC TOUCH SCREEN DRIVER.


1, Plug in a USB Keyboard into one of the spare USB slots on the PC

2, Power the machine up so that it boots up into game mode

3, Press Ctrl and Esc buttons together. This will bring up All Programs in the bottom left hand corner.

4, Using the Arrow keys scroll down to All Programs so it is hi lighted blue and press Enter

5, This will bring up another drop box. Scroll down to Accessories and press the arrow right key.

6, Another drop box will appear scroll down to Windows Explorer and press Enter.

This will bring up the My Documents Screen.

7, Using the arrow keys scroll down to My Computer and arrow right.

8, Scroll down to Local Disk and press the Tab button this will put you on the opposite side of the page.

9. Using the arrow keys again go to the file called Windows 2k XP Drivers and press Enter.

10, On the next page the same file will appear, hi light the file blue and press Enter

11, This will bring up a file called UPDD 4.1.6r. Use the arrow keys to hi light this file and press Enter.

12, Then select SetUp and press Enter

13, This will bring up the Zytronic UPDD set up screen. Using the arrows select Zytronic x y USB and press the Alt button and I together.

14, A loading bar will now appear in the bottom right hand side of the screen.

15, Once the drivers have finished installing a Install screen complete with appear now press Alt and C together this page will now disappear.

16, Now hold down Ctrl and Esc again and select All Programs and press Enter

17, In the next box scroll down to UPDD and then arrow right

18 Calibrate will now be hi lighted press Enter and this will load up the Touch screen

test.

19 Press all 9 points and then confirm.

The Touch screen should now work correctly. Close all of the windows by pressing

the red x in the top right hand corner of the pages and then reboot the machine.